Click image to view full size image
D2800 2CH DSP Built-in Powered Amplifier Module
Description
D2 series powered speaker module consists of class D amplifier board; switching power supply and DSP module,
have eleven model : D2L; D2L-SUB8; D2L-SUB4; D2L-TWO and D2S; D2S-SUB8; D2S-SUB4; D2S-TWO , and D2450; D2650; D2800 .
Features
1>. Light Weight : only 2.75KG
2>. Compact Installation Dimension for all kinds of cabinet box
3>. There are two version operation voltage :
The 110 version can operate from 90V to 135V voltage range;
The 220V version can operate from 180V to 265V voltage range
4>. Each model is mounted an agile DSP module for versatile PA Systems Performance, you could manage this PA system via PC which connected with a USB or RS-485 cable
- See more at: http://www.china-sanway.com/D2800-2CH-DSP-Built-in-Powered-Amplifier-Module-pd171131.html#sthash.Lb1HvSMx.dpuf
Specification
Description
D2 series powered speaker module consists of class D amplifier board; switching power supply and DSP module,
have eleven model : D2L; D2L-SUB8; D2L-SUB4; D2L-TWO and D2S; D2S-SUB8; D2S-SUB4; D2S-TWO , and D2450; D2650; D2800 .
Features
1>. Light Weight : only 2.75KG
2>. Compact Installation Dimension for all kinds of cabinet box
3>. There are two version operation voltage :
The 110 version can operate from 90V to 135V voltage range;
The 220V version can operate from 180V to 265V voltage range
4>. Each model is mounted an agile DSP module for versatile PA Systems Performance, you could manage this PA system via PC which connected with a USB or RS-485 cable
- See more at: http://www.china-sanway.com/D2800-2CH-DSP-Built-in-Powered-Amplifier-Module-pd171131.html#sthash.Lb1HvSMx.dpuf
Specification
| D2450/D2650/D2800 Class-D Powerd Amplifier Module with DSP | ||||
| SPECIFICATIONS | ||||
| ITEM/MODEL | D2450 | D2650 | D2800 | |
| Output Power | ||||
| 8Ω Stereo Power | 2x450W | 2x650W | 2x800W | |
| 4Ω Stereo Power | 2X500W | 2x700W | 2x850W | |
| Frequency Response | 20Hz-20KHz ±1dB | |||
| THD+N 1KHz 1W 8Ω | <0.1% | |||
| Signal to Noise Ratio 1KHz | >100dB | |||
| Channel Separation 1KHz | >80dB | |||
| Class | D | |||
| Protection | Short, DCP, OVP, UVP, OCP, OTP | |||
| Operating Voltage | 110V version: 90V-135V / 220V versioin: 180V-265V | |||
| Input Sensitivity | 0.77V | |||
| Input Impedance | 20KΩ | |||
| DSP Fuction | MUTE, Polarity, Gain, Delay, Limiter, EQ, Xover | |||
| DSP Control | USB and RS-485 | |||
| Dimensions(W×H×D) mm | 332×160×100mm | |||
| Packing Dimension(mm) | 370×225×170mm | |||
| Net Weight(kg) | 2.75kg | |||
| Gross Weight(kg) | 3.45kg | |||